Investing in ourselves

Words: Jennifer MorrellGather a group of mason contractors and masonry industry professionals in the same room, and you’ll hear talk of the same issues time and again. “We need to do a better job of promoting masonry. We need better masonry education. We need the ability to conduct more research to prove the worth and benefits of masonry."

Although well-intended companies contribute funds in support of masonry, but the picture — and the need — is much bigger. Relying on a slice of the pie to support the whole is not working. Existing grants and funds are commendable, but those monies aren’t consistent enough to create a real push for the industry.

So, finally, the masonry industry is making a conscious decision to invest in ourselves, in order to create a future for and a continuation of the industry — and it’s about time.

The players and the plan

The idea for a check-off program was born back in 2009, when the Mason Contractors Association of America (MCAA) and the National Concrete Masonry Association (NCMA) put their heads together at a meeting in Phoenix, Ariz.

The effort would consist of writing a bill, introducing it before Congress, garnering support and getting it passed, and — eventually — putting into place a concrete masonry unit (CMU) Check-Off Program for all concrete masonry producers.

Concrete masonry producers would donate one penny per block sold into a fund that the masonry industry would use toward education, research and marketing — all of which are desperately needed.
“The effort would allow the concrete masonry industry to fund promotion of our product. No lobbying, etc., would be funded with this money,” says Major Ogilvie, national chairman of the National Concrete Masonry Check-Off Program (www.cmucheckoff.com), NCMA member, and GM for USA Family of Co.s (Block and Ready Mix USA). “The check-off program is its own entity and will have its own board with the final say on the investment of dollars. The board will have members from five regions to insure consistent and thorough representation of all members.”

The breakdown of Check-Off Program funds would be as follows: a maximum of 10 percent for administration, with the remaining 90 percent being in invested in local, state, regional and national opportunities — in that priority.

Once Congress approves the proposed concrete masonry industry’s program, all U.S. concrete producers will vote a simple majority to establish the program for our industry. Each producer will be assessed $.01 per CMU produced.

A third-party entity accountable to the board will collect the funds, with the board managing and investing the funds collected. Ogilvie estimates the amount to be $8 million to $10 million annually, based on the current estimates of volume. A group of nominees will be slated from various geographical regions of the country, and the secretary of the proposed agency — The Department of Commerce - overseeing the program will appoint 21 voting board members from the slated group recommended by the industry-submitted nominees.

Can it work?

Absolutely, it can work. You’re probably familiar with similar campaigns from the beef (It’s What’s for Dinner), milk (Got Milk?), propane, wood and other industries. This would be no different as a mandatory donation toward a fund to promote the product is sure to bring success. In fact, the Canadian Concrete Masonry Producers Association already has seen success with a program similar to a Check-Off Program that began in 2004.

Although the NCMA has had a voluntary donation program in place since 1981, no consistent program ever has existed. In order to adequately fund research projects, educational efforts and promotional/marketing campaigns, a consistent stream of revenue is needed.

For example, Ogilvie says the NCMA once wanted to conduct a study to compare concrete masonry with other systems, but it simply wasn’t affordable at $275,000. The Check-Off Program would make such a study possible. This would arm our industry with researched, well-documented information to prove that masonry systems are the best choice.

“There’s a lot of low-hanging fruit out there we could capitalize on,” says Ogilvie. “Designers aren’t familiar with how to design with our products. Our products would have a presence, and people would feel more comfortable. We need to promote important values, like wind and fire resistance, sustainability and life-cycle costs.”

One obvious use of the money might be to contribute funding toward incorporating masonry into Building Information Modeling software. This is another current effort by the masonry industry to promote and bring to the forefront the benefits of designing with masonry.

Where we are

Major Ogilvie first traveled to Washington, D.C., in 2010 to learn if federal money was available for the various initiatives, but says a government handout was not the goal. He then learned about Check-Off Programs and the success that agricultural industry had with them. Today, 23 commodity Check-Off Programs exist in the United States.

After becoming national chairman of the National Concrete Masonry Check-Off Program in fall 2010, he hosted a group of industry leaders in Dallas that December to design a plan of action. Ogilvie has championed the effort to present legislation before Congress that would authorize the creating a concrete masonry Check-Off Program, having hosted industry fly-ins to gain support. Both the Senate and House of Representatives have to accept the plan, and then concrete block producers can vote to approve the program so that it can be implemented.

Ogilvie says that, of the 350 concrete block producers in the country, 96 percent are small, family-owned businesses. In a tough economy, one penny can mean a lot. But he estimates that only 25 percent of the marketing and research needs of the industry are being met. A Check-Off Program is an optimum solution.

Since Ogilvie assembled the team and effort for the Check-Off Program, he, Mark Kemp (MCAA), and other members from both NCMA and MCAA dedicated to this effort spent a great deal of time in 2012 in Washington, D.C., getting in front of Congress members to explain the importance of the National Concrete Masonry Check-Off Program.

And the buzzword when Check-Off Program proponents are before lawmakers is simple: jobs. “The key word is jobs,” says Mark M. Kemp, CEO of Superior Masonry Builders Inc., and vice chair for the MCAA. “It’s about job creation, sustainability and safety. Increased market share will, ultimately, create jobs. Masonry is a labor-intensive system that provides good, quality jobs.

“The Check-Off Program has been one of the main things we are pushing for; it’s our survival,” Kemp continues. “Without it, we won’t be able to compete with other systems. We have always been segmented. We all have ideas, but no one has the money to invest in our future. Precast is killing us, and the wood industry has their program running.”

What’s next?

Kemp says the group had hoped to get the Check-Off Program pushed through Congress during the lame duck session of 2012, having been in Washington, D.C., with others in December to promote the effort. But that did not happen, so 2013 is the year to accomplish the goal.

A trip to D.C. is planned for more discussions. With a shift in Congressional members, the group behind the Check-Off program is, in some ways, starting all over.

“We will begin process again in the 113th Congress,” Ogilvie says. “We’ll be meeting with Congressmen, explaining our program, and getting their signatures.” He adds that in the 112th Congress, the proposed bill had 56 cosponsors in House of Representatives and 10 cosponsors in Senate, and this was bipartisan support. What have not changed are the cosponsors of the bill, Sen. Bill Nelson (D-FL) and Sen. Roy Blunt, (R-MO).

“We need to push it through and get it done this year,” Kemp says. “An extreme effort has been made thus far by the MCAA and the NCMA in the way of writing the bill, lobbying, visits to Washington, and convincing producers.”

Much of the discussion with Congressmen will happen during the MCAA Legislative Conference in May in Washington, D.C., when members of the MCAA and the NCMA will heavily push the Check-Off Program to lawmakers. But this is only part of the effort. In addition to the extensive work that occurs behind the scenes by Major Ogilvie, Mark Kemp, and others, visits will occur throughout the year.

Our industry is determined to create a way to fund education, research and marketing. We are ready to invest in ourselves.

Investing in ourselves

The players and the plan

Can it work?

Where we are

What’s next?

About: Featured

Add a product...

Checkout

Interested in these Special Bundle Deals? Continue to check out

2024 Architectural Awards: Excellence In Masonry Winners

By: Ashley Kelly

NSI and ISFA Announce Silica Exposure Literature Review

By: Amy Oakley

La Maison Franchère: How Masonry Turns Functional Buildings Into Timeless Beauty

By: Vera Autushka

MASONRY STRONG Podcast Episode 5 Recap: Zach Everett

By: Justin Stengel

About: Featured