MIA CEU Course Teaches Stone Specification

Words: Jim CookChoosing the right stone for a project is more difficult than it sounds. Architects and designers must weigh a number of factors, including functionality, durability and availability, when selecting stone for construction projects. New training opportunities offered by the Marble Institute of America are aimed at helping designers and architects better understand natural stone and how to select the right material for the job.

The Marble Institute of America (MIA) has launched a new continuing education program, “The Art of Specifying Natural Stone.” The program is a one-hour session that will teach architects and designers how to specify natural stone. The course will also be available through certified MIA CEU providers throughout the year.

“This course was developed because CEU (continuing education unit) program attendees have expressed a strong interest in a course about specifying natural stone,” says Sarah Gregg, CEU administrator for the MIA. “This new course will answer some of the most common questions about specifying and help participants better understand the topic.”

Stone suitability will be a major focus of the seminar. Participants will learn about the three species of stone: sedimentary, igneous and metamorphic. They will also learn about stone types: calcareous or siliceous. Stone species and type have a huge impact on whether stone is suitable for certain uses.

Consider these facts about different stone types and their best uses in construction:
  • Granites and basalts — These forms of stone work well for just about any indoor or outdoor application. Granites and basalts are igneous, siliceous forms of stone.
  • Sandstone — A sedimentary, siliceous form of stone, sandstone works well for most indoor and outdoor applications. Laborers must pay careful attention when mechanically anchoring this variety of stone, however.
  • Limestone and travertine — Both sedimentary and calcareous stone varieties, limestone and travertine work well for several outdoor and indoor applications. They may also work well for countertops, but do not always do well in kitchens.
  • Marble — A metamorphic, calcareous form of stone, marble works quite well in interior applications and for some countertops, excluding food preparation areas. Outside use is more difficult and should be evaluated on a case-by-case basis.
  • Slate, quartzite, serpentine, soapstone — These are metamorphic, siliceous stone varieties.
In general, they work well in a limited number of outdoor and indoor applications and are great for countertops.

Lecturers will address stone color, explaining how certain colors work better than others for particular applications. For example, darker color stone may be more suitable for floors as it is less likely to show dirt and stain easily.

“Architects and designers must have an understanding of the properties of stone, as well as its availability, durability and maintenance requirements,” Gregg says. “If they specify a stone that will not perform well in a particular setting that can lead to long term problems and shorten the lifespan of the project.”

Lecturers also will address the responsibility of each pillar in the typical construction project involving stone. Design professionals must select stone that will be the best fit for its application, from both an aesthetic and economic standpoint. Material suppliers must obtain stone that meets or exceeds the performance parameters of the intended application. Installing contractors are responsible for providing skilled labor to properly install the stone.

The end user of the facility needs to provide architects and designers with realistic requirements for the project and commit to proper maintenance once the project is complete. The session will also address some economic factors influencing stone selection. Attendees will learn to consider factors such as the proximity of quarries producing desired stone, the output of these quarries and their ease of access to transportation routes when making stone selections.

Lecturers will also address labor and logistics, explaining what stone types and finishes are more labor intensive than others and teaching attendees how to factor these considerations into their decisions. Gregg says demand by architects and designers led to the creation of the “The Art of Specifying Natural Stone” program.

“CEU program participants fill out an evaluation form at the end of each course,” Gregg says. “When reviewing these forms, MIA noticed that many participants specifically said that they would benefit from a course focused on specifying natural stone. This shows there was a need for a course on the subject.”

The MIA provides continuing education programs for architects, interior designers, kitchen and bath professionals and landscape architects that are recognized by dozens of professional organizations, including the American Institute of Architects, Interior Design Continuing Education Council, Landscape Architecture Continuing Education System, National Kitchen and Bath Association and more. The programs are valuable to firms, as it saves them from having to develop and implement their own continuing education programs. More than 2,000 architects and design professionals have participated in MIA continuing education courses this year.

To learn more, visit www.marble-institute.com/CEU.
About: Educational (University)Featured
 0
2024 Architectural Awards: Excellence In Masonry Winners

The Masonry Advisory Council held the 2024 Excellence in Masonry Awards on Saturday, October 26th at 167 Green St., Chicago, Illinois. Honoring 80 projects from over the Chicagoland and Northwest Indiana Area. The Awards program celebrates outstanding ar

By: Ashley Kelly
Read More
NSI and ISFA Announce Silica Exposure Literature Review

NSI and ISFA are proud to present a literature review that summarizes the growing library of studies related to respirable crystalline silica (RCS) exposure. Completed by Yale Occupational and Environmental Medicine, the study covers 34 publications and d

By: Amy Oakley
Read More
La Maison Franchère: How Masonry Turns Functional Buildings Into Timeless Beauty

La Maison Franchère, or the Franchers’ House, stands as a notable relic of stone architecture in Saint-Mathies, a small Quebec town on the edge of the Richelieu River. Unlike the neighboring homes, this towering, two-and-a-half-story mansion immediately c

By: Vera Autushka
Read More
MASONRY STRONG Podcast Episode 5 Recap: Zach Everett

Welcome back to another insightful episode of the Masonry Strong podcast! Today, we have a very special guest, Zach Everett, sharing his journey and experiences in the world of safety within the masonry industry. From humble beginnings to becoming a vital

By: Justin Stengel
About: Featured
Read More