Fechino Files: Welding

Words: Steven Fechino

As a masonry contractor, welding typically falls into two categories: fabrication or repair. Fabrication is when our certified welders make structural connections on the job site, and repairs are just that; when we have to fix one of the hundred things that break every year, such as equipment, scaffold pins, and even truck beds. Many masonry contractors employ certified welders because they can easily maintain a job site schedule when a few quick structural welds are required. I worked with a couple of certified welders, Mark Hampton and Firecracker (his real name was Elbert McPeak). I believe that they could weld behind their backs with one eye shut, one hand holding a cold soda, and balancing on one foot. Those guys were amazing.

In an abbreviated discussion, The American Welding Society (AWS) offers a Certified Welder Certification based on welding performance; however, the employee does not need to attend a particular school or have prerequisites, but prior experience will be the key to passing the testing requirements. To become a Certified Welder (CW), the employee has to schedule an appointment with an AWS Accredited Testing Facility, typically located in a larger city where work is plentiful. The testing is strict, but once you pass, the credentials are transferable from company to company and are nationally accepted.

The test includes an application that must be filled out, a practical assessment of welding skills—which includes the skills of flat, vertical, and overhead welding to mention a few of the tasks—and a written assessment from the employee. If the facility passes the employee, then payment is made, a certification card is issued, and within approximately three weeks an employee can become a certified welder. There are many certifications offered by the AWS; the Certified Welder Certificate is the first step.

Having been around forever, I have seen that older welders still tend to prefer “stick” Arc welding (actually it is Flux-cored arc welding), because they can set the welder settings in the shop, in the yard where a breeze may be present, and even on a scaffold, almost to the same settings because the weldment or electrode is protected by a material flux that is on the welding rod. This flux is direct, unlike gas that may disperse quickly when there is a slight breeze. The biggest drawback is that this method will create a bit more spatter than other methods of welding. Arc welding is a convenient method of welding when an older piece of metal that may have mortar, scale, or even rust needs to be welded. I am not saying that proper preparation is not necessary, but in some cases when we are fixing old or broken things, sometimes we do the best we can and perfection is not an option. The Arc weld is typically my first choice.

Welding rods are expensive, and all have their proper application. I keep my welding rods in my office in a closet, grabbing what I need when I have something to weld. I do not keep my welding rods outside in my shop because the humidity here in Tennessee is too high and the flux tends to not perform as well after sitting out. I keep them drier by keeping them in my office, and somehow, I lose less of them. I also have different rods depending on what needs to be welded, but since I do not do fabrication and tend to only fix broken things, I like to use the “Farmer Rod 6011,” a term coined by Miller Welding. This rod is definitely forgiving. The 6011 welding rod (electrode) has deep penetration, burns very fast, and will have a higher rate of spatter over the electrode you would use for structural fabrication. This rod is easier to learn on and still gives a fully penetrated weld for repairs that need to be trusted.

On a job site, the rod of choice will typically be a 7018. This is a thicker structural rod, good for thicker welds with a bit less penetration per pass and less spatter than other rods. The 7018 can be used for repairs as well, but the 6011 is typically not used for structural fabrication.

Arc welding is the only form of welding currently permitted on a job site for structural welds because the flux on the rod ensures the protection of the arc from atmospheric elements.

Younger welders definitely prefer the MIG welding process. Gas metal arc welding (MIG) was easier for me to learn. It is a faster process overall, can be set to use on much thinner metals, and has two options for flux. The first option is to use a shielding gas; this process can only be used inside, as a slight breeze would disperse the shielding gas and therefore the weld would not perform as desired. Personally, I use a flux core wire, where the flux coats the electrode wire that dispenses from a roll of wire through a handheld “gun,” providing the welder with ease and accuracy that outperforms the Arc option. This wire option allows for outdoor welding, typically of a thinner gauge material.

Here is the reality: everyone who has ever been too casual around someone who welds has paid severely. If you were ever in a concrete block building and someone was welding at night and you turned your back on the weld but looked at the wall, the reflection off the walls is enough to burn the living daylights out of your eyes, with a reaction that will show up about 2:30 a.m. when you feel like someone rubbed your eyes with masonry sand. If you ever had to do a quick weld and thought you could block the weld with your hand, again, lesson learned. If you ever welded and saw white smoke after the arc had stopped, yes, your shirt was on fire. Welding has precautions and common-sense rules. I am the worst person to say I have always used proper personal protection, but when welding, I can assure you that it is worth taking the extra steps. If it is hot outside when you are welding, you are going to sweat. If you are welding on a hot day with protective gear, yup, you are going to sweat, but you will not burn tissue, and believe me, from someone who is not as smart as you, the protective gear is worth it.

 0
Embracing Software: A Game-Changer for Masonry Companies

With challenges such as labor shortages, rising costs, and increasing competition, masonry businesses must find ways to work smarter, not just harder. Fortunately, construction technology and software solutions tailored to field management and operations

By: Erin Laird
About: Featured
Read More
Bring Depth and Character to Any Space with Stone Accents

Transforming spaces with warmth, character and a touch of rustic charm doesn’t always require a complete overhaul, but can be quickly and efficiently achieved with manufactured stone veneer (MSV). Whether your customers are looking to elevate the look of

By: Sarah Lograsso
About: MAP Partner
Read More
2024 Gear of the Year

2024 was a year of innovation and advancement in the masonry industry. From tools, to materials, to technology, companies all across the trade are putting their foot forward to change masonry for the future. This year, we reached out to our MAP partners

About: Featured
Read More
Building More: Accuracy or Efficiency

I am sure by now you have heard the saying that you can have it good, cheap, and fast. The problem is you can only choose two of the three. Good and cheap won’t be fast, cheap and fast won’t be good, and good and fast won’t be cheap. It is a phenomenal an

By: Corey Adams
Read More