Painter's Corner: Busy-Busy

Words: Bronzella Cleveland

Jerry Painter  

Man, what a busy month of June. The first week of June, we were in Denver for ASTM meetings. The Masonry Society Meetings were June 13-15, and the 13th North American Masonry Conference was June 16-18 In Salt Lake City. After a week of catching up at home and the office, we spent a couple of days in the Panhandle working with the mason contractor chapter to establish an apprenticeship class.   Going into Denver, we were able to squeeze in a few days to stay with a couple of special friends. We spent most of our time meandering in the Rocky Mountains visiting the wildlife enjoying the beautiful scenery. It made me think of the many times when my parents were traveling around the Rockies.   My Dad would always say that his eyes just couldn’t take it all in. Those were my exact same feelings. You get up into all that grandeur and visit with the mountain goats, fish, deer, and ducks you begin to see just how insignificant we can be.   But in the code and standard world, YOU are not irrelevant.  As a matter of fact, you and other mason contractors are critical to the maintenance and promotion of the codes and standards that affect us, every job and every day.   At the TMS meeting, one of the discussions centered on the use of 3/16” horizontal joint reinforcing, ladder vs. Truss HJR and butt welding any attachment to the HJR. This is the reason we need contractor participation. Engineers, professors, and producers are the ones making the decisions. We need more input from the segment of the masonry industry. You are the ones that must meet the job specifications and the Masonry Code TMS 402/602.   Also, of interest in the TMS 402/602 meeting, the subcommittee on veneers is continuing their review of TMS 402 Chapter 12 on veneers. There have been almost 200 negative/comments about working thru and settling. Once this is complete Chapter 12 will be easier to read and understand. There are Task Groups also working on the HJR issues and trying to clarifying some misconceptions in TMS 602 Part 3.5 D.1 on grout pour height.   The 13th NAMC this year was one of the largest ever. While it is titled the North American Masonry Conference, it had an international flavor. There were 158 papers from around the world presented on almost any type of masonry research you can imagine.   There were 17 Innovative Technology presentations given on new products and system innovations. Some of these you may be aware of already and some you will see in the not-to-distance future.   The ASTM meeting in Denver did not have any major issues. There are people still looking for some strength of mortar field testing. That is NOT going to happen while I’m breathing. There is the very best quality assurance protocol for testing mortar in the field.   If you are not sure what the protocol is, or you are expanding your business into the market where QC/QC will become part of your process and need help. Ask for it. Don’t fumble and stumble along, losing time and money. Your local association or MCAA WILL help you.    Another issue we can’t seem to find a resolution for is the proposal of Acceptable Masonry Workmanship. Part of the problem is that ASTM develops standards and guides by consensus. This means that every vote for NO has to be dealt with. Currently, there are no tolerances for masonry in ASTM. There are some in TMS 602, but you must remember that this is a structural document and not one for visual appearance. So, if an architect/designer wrote in the project specifications that they wanted the head joints between the masonry units to be exactly 3/8”, can you do it?   What about a 1/32” difference between the face planes of the masonry units? If we as masonry contractors don’t help navigate or drive the bus, we will only go where everyone else wants to go. We need this document, or you will succeed or fail by the masonry mockup. If you have questions or would like to help by verifying tolerances on a project or two of yours, contact me thru your MCAA.   RAISE THE LINE and come on around the corner.    
 0
Business Building: Play Business Like Golf With Targets

One of my dreams is to play in the top 100 rated golf courses in the world. Often these courses are private country clubs which hold professional golf tournaments. To date, I have been fortunate to play over 350 of them. Every year, I look forward to "Gol

By: George Hedley
About: Featured
Read More
Fechino Files: The Cool Thing About Masonry

I have been at this for a long time, and a generation or two have come and gone since I started. I have worked with grandfathers, fathers, and now sons from the same family. I have seen similarities and differences. In one case, I saw a grandson believe h

By: Steven Fechino
About: Featured
Read More
Marvelous Masonry: The London Bridge

The London Bridge has been a symbol of innovation, resilience, and the evolution of masonry craftsmanship for centuries. Its transformations over time, from timber to stone and eventually to modern concrete, mirror the growth and ambition of London itself

By: Cass Stern
About: Spotlight
Read More
Chairman's Message: Resolutions, Revolutions, and Resets

The winds of change are all around us. You can feel it in the air, in the conversations we all had over the holidays, and in our interactions at work and all about town. Throughout history, we have used our national elections to make changes in the missio

By: Dick Dentinger
About: Chairman’s Message
Read More