Masonry Magazine September 2012 Page. 34

Words: Ted Corvey
Masonry Magazine September 2012 Page. 34

Masonry Magazine September 2012 Page. 34
MIXERS, PUMPS AND DELIVERY SYSTEMS

When concrete, mortar and stucco are consistent and readily available on a worksite, the rest of the team can excel at their jobs.

water supply from a hose or potable water tank and let the mixer do its job. Since the D-35 Mixer mixes material and water to exact ratio specifications, you can choose how much product you need at any given time and minimize waste. The D-35 is self cleaning within minutes, and there is no need to break apart the machine just to shut it down for the night.

Continuous Mixer advantages

* Push-button ease
* Reduce waste by making only the amount of product needed
* Perfect consistency
* No jobsite mixer required
* Increase productivity
* Minimize labor
* Easy operation and clean out.

Dry to wet, on demand

CREWS WILL SAVE TIME and money on the jobsite by getting consistent materials with just the push of a button.

Delivering the goods

PUMP SYSTEMS are time savers on sites that require a consistent flow of material to workers. The D-35 Continuous Mixer from Amerimix is equipped to supply pump systems with a consistent mix of product that can be sent 50 feet up or 125 feet horizontally to workers. This helps eliminate the back-and-forth hauling of tubs that interrupts workflow multiple times throughout the day.

When concrete, mortar and stucco are consistent and readily available on a worksite, the rest of the team can excel at their jobs. The right delivery tools make all the difference. IMAS

Andy Brinkmeier is VP-Amerimix for Bonsal American/Oldcastle. He can be reached at 704-529-4209 or andy.brinkmeier@oldcastle.com. Visit www.amerimix.com.

New Wetmix System from SpecMix

The SPEC MIX D2W WETMIX continuous mixing system is designed to give the mason contractor control over the key elements that allow him to make a profit. For example, what does a masonry foreman do when he has to grout a CMU wall by the end of the day to stay on the GC's schedule, but it's 3 p.m., and the ready-mix truck delivering eight yards of core fill is an hour late? Does the foreman reschedule the grout pour for the following morning, or keep his crew onsite until the truck arrives, paying his crew overtime? Either way, the mason contractor loses both time and money - not an efficient solution to a common job site problem.

The SPEC MIX D2W WETMIX allows a mason contractor to mix grout and mortar on site, whenever the crew needs the material. With an output rate at nearly eight cubic yards of grout per hour, the system will produce the material needed to efficiently keep a standard grout pump and masonry crew busy reinforcing a wall. The system also can be reloaded with SPEC MIX bulk bags as your team places the grout.

The SPEC MIX D2W WETMIX can mix a 10-cubic-foot tub of mortar in less than five minutes with the push of a button. The system uses a unique array of specialized mixing paddles and agitators that fold and sheer the material to efficiently hydrate the dried aggregate, and mechanically work natural air into the material for maximum workability. It is no longer necessary to place a laborer at the mixing station to shovel sand or operate a silo; it can all be accomplished from the seat of a jobsite forklift with the use of a wireless remote control. The driver can place a tub underneath the mixer, push a button on the remote and drive away. The mixer automatically stops at the set time.

Control panels allow the operator to preset the batch size from as little as a five-gallon pail of material to a mud tub to continuous output, eliminating material waste by rightsizing batches to the required work. A specialized water pump panel allows the contractor to control the water-to-cement ratio of the material, making material testing virtually obsolete. The system runs on single-phase, 230-volt, 50-amp power. Its direct connection to the bottom of a SPEC MIX Silo eliminates any dust associated with mixing cementitious materials. The SPEC MIX D2W WETMIX also has a preset cleaning cycle that flushes the mixing chamber with water until it is clean, and then automatically shuts off.


The Cornerstone of Success: Safety and Documentation in Masonry
April 2025

The masonry industry plays a vital role in constructing our homes, businesses, and infrastructure. Yet, beneath the enduring beauty of brick and stone lies a complex and often hazardous work environment. Ensuring the safety of workers and maintaining docu

How It's Made: Natural Stone Veneer
April 2025

Natural stone veneer is a durable, versatile, and aesthetically pleasing building material that has been used for centuries. It adds timeless beauty to masonry projects while offering structural integrity and resilience. But how does natural stone veneer

Vibing Masonry #5 - The Evolution of Concrete Masonry Units: From Ancient Foundations to Modern Innovations
April 2025

Early Development: The Genesis of Concrete Blocks (early Rome to 1900s) The history of concrete masonry units (CMUs) or concrete blocks begins with humanity’s earliest binding materials, notably the Romans’ remarkable concrete. Around AD 125, structures l

MASONRY STRONG Podcast, Episode 18 Recap: Jeff Tew, Westlake Royal Stone Solutions
April 2025

On this episode of the MASONRY STRONG Podcast, Jeff Tew joins the show, along with MCAA President Jeff Buczkiewicz, to talk about where his passion for this industry started and what it's been like working on the Supplier side of the industry. An Excitin