Masonry Magazine October 2012 Page. 33

Masonry Magazine October 2012 Page. 33

Masonry Magazine October 2012 Page. 33
SCAFFOLD PLANK
LAMINATED OR SOLID SAWN

KUHNER FUNERAL HOME
When Al Kuhner made the decision to move and expand his funeral home business to a historic home in his town, he was required to not only transform the home, but also create a parking lot. This 10,000-square-foot parking lot was to complement the existing early-20th century architecture and comply with 21st century zoning restrictions on impervious surfaces.

Permeable pavers were chosen for this project as they are a good match to the natural grey of the stone in the home and, most importantly, created a durable surface that allows water to infiltrate to the subsoil making it eco-friendly. The aesthetics of the project were outstanding as well for the owner and the municipality.

RESIDENTIAL PROJECT COMBINES SEGMENTAL RETAINING WALL AND PAVERS
After adding a new addition to his rural home, the homeowner designed and built a large outdoor living area with an in-ground pool; a complex, 360-degree perimeter drainage and underground vault system to access septic tanks; and a custom-built fireplace. He back-sloped the area above and behind the retaining walls, and added soft landscaping for depth and color.

In the patio area, tumbled pavers complemented the walls and covered access to the underground septic tanks. The custom-designed fireplace included hand-laid firebrick and a mix of several different materials.

No matter what the size of your project, plan ahead and include all key municipal, design and construction personnel to ensure a quality structure with a lifetime of service. IMAS

Jan Boyer has been the executive director of the Pennsylvania Concrete Masonry Association since 2000. She serves on the board of directors for The Masonry Society and the Masonry Alliance for Codes & Standards. Involved in the masonry industry for more than 14 years, she also is affiliated with the Concrete Joint Sustainability Initiative and the State Alliance of the National Concrete Masonry Association. Contact her at jboyer@pacma.com or 717-279-6346. Visit www.pacma.com for more information.
When it comes to jobsite safety, your workers deserve the best!
•Microllam
Master Plank
•DI-65 Pine
•OSHA Recognized
•Third Party
Inspection
Proof Tested &
Stamped
• Readily Available

A WORLD OF SOURCES FOR SPECIALTY WOOD PRODUCTS
SERVING THE INDUSTRY FOR OVER 60 YEARS
MCAUSEY L
800 365 9663
586 294 9663
Roseville, MI USA
www.mccauseylumber.com
READER SERVICE #160
CAUSEY LUMBER CO.

Saves Money, Time & Materials
$ Generates Income
Brand New Green Building Aide
Supports Openings 1-20 Feet

Check out "Kwik" video at KwikLintel.com
Scot Kelly
949.338.4546
scot@kwiklintel.com
KWIK
LINIEL

www.masonrymagazine.com
READER SERVICE #292
October 2012
MASONRY 31


The Cornerstone of Success: Safety and Documentation in Masonry
April 2025

The masonry industry plays a vital role in constructing our homes, businesses, and infrastructure. Yet, beneath the enduring beauty of brick and stone lies a complex and often hazardous work environment. Ensuring the safety of workers and maintaining docu

How It's Made: Natural Stone Veneer
April 2025

Natural stone veneer is a durable, versatile, and aesthetically pleasing building material that has been used for centuries. It adds timeless beauty to masonry projects while offering structural integrity and resilience. But how does natural stone veneer

Vibing Masonry #5 - The Evolution of Concrete Masonry Units: From Ancient Foundations to Modern Innovations
April 2025

Early Development: The Genesis of Concrete Blocks (early Rome to 1900s) The history of concrete masonry units (CMUs) or concrete blocks begins with humanity’s earliest binding materials, notably the Romans’ remarkable concrete. Around AD 125, structures l

MASONRY STRONG Podcast, Episode 18 Recap: Jeff Tew, Westlake Royal Stone Solutions
April 2025

On this episode of the MASONRY STRONG Podcast, Jeff Tew joins the show, along with MCAA President Jeff Buczkiewicz, to talk about where his passion for this industry started and what it's been like working on the Supplier side of the industry. An Excitin